Setting Up the SATO CG408TT Barcode Label Printer on a Windows PC
To set up the SATO CG408TT barcode label printer on a Windows PC
- Download and install the SATO Windows Printer Drivers from the SATO website.
- After downloading and installing the printer drivers, open the Control Panel.
- Open Printers and Faxes.
- Right-click SATO CG408 and select Printing Preferences.
The SATO CG408 Printing Preferences window opens.
- Ensure that the Printer Settings tab is open.
- Click Page Setup and select the following settings:
- Stock: Custom
- Copies: 1
- Width: 2.10
- Height: 1.70
- Media type: Labels with gaps
- Media from: Roll
- Rotation: 180 - Portrait
- Click Print Options and select the following settings:
- Speed: 2.0”/s
- Darkness: 2
- Top Offset: 0”
- Left Offset: 0”
- Format number: 1
- Click Print Mode and select the following settings:
- Operation mode: Continuous
- Pitch offset: 0”
- Type: Off
- Click OK to save your settings.
- Open the Control Panel again.
- Open Printers and Faxes.
- Right-click SATO CG408 and select Printing Properties.
The SATO CG408 Properties window opens.
- Click the Driver settings tab.
- Click Driver Settings and select the following settings:
- Always use driver settings
- Backward compatible font names
- Click Configure Printer and select the following settings:
- Label width: 2.1”
- Label height: 1.7”
- Media type: Continuous labels
- Top offset: 0”
- Left offset: 0”
- Speed: 2.0”/s
- Darkness: 2
- Darkness range: A
- Print method: Thermal transfer
- Paper end detection: Roll
- Print operation mode: Tear off
- Tear off offset: 0”
- Click OK to save your settings.