Setting Up the Zebra TLP 2824 Plus Barcode Label Printer
To set up the Zebra TLP 2824 Plus barcode label printer
- Download and install the printer drivers from the Zebra website.
- After downloading and installing the printer drivers, open the Control Panel.
- Open Printers and Faxes.
- Right-click ZDesigner TLP 2824 Plus (EPL) and select Printing Preferences.
The ZDesigner TLP 2824 Plus (EPL) Printing Preferences window opens.
- Ensure that the Options tab is open and select the following settings:
- No. Of Copies: 1
- Speed: 1.50
- Darkness: 3
- Stocks: User defined
- Paper Format: Inch, portrait, rotate 180°
- Width: 2.10
- Height: 1.48
- All Unprintable Areas: 0.00
- Click the Advanced Setup tab and select the following settings:
- Direct thermal (both Direct thermal and Thermal transfer may be grayed out)
- Media Type: Label with gaps
- Device Options: None and Top of form backup
- Gap/Mark Height: 0.01
- Offset: 0.00
- Cut position: 0.00
- Top offset: 0.00
- Cutter: Never
- Click OK to save your settings.