Setting Up the Haag-Streit Interface

1. Double-click the Eyefinity Equipment Interface Setup icon on your computer desktop.

   The Eyefinity Equipment Interface Setup window opens.

2. Click Add.
3. Select the Haag-Streit manufacturer and the appropriate Capture Octopus device.
4. Click Add.

   The settings and options appear.

5. (Optional) Enter a Device Nickname.
6. Click Browse, and select the EMR source folder location on the network where EyeSuite temporarily saves the data file. This location should be the same location that you specified as the shared source folder in Setting Up the Haag-Streit EyeSuite Software.

   You must select an empty folder on your network that is not used by any other application, including EyeSuite. If you select a folder that contains files, they will be deleted during the integration and data transfer process.

7. Click Browse, and select the empty printouts output folder. This folder should be the same folder that you specified as the output folder in Setting Up the Haag-Streit EyeSuite Software. This folder is where the reports are exported and temporarily stored.

   You must select an empty folder that is not used by any other application, including EyeSuite. If you select a folder that contains files, they will be deleted during the integration and data transfer process.

8. To always start the interface in perimetry, select PERIMETRY_STATIC or PERIMETRY_KINETIC from the Launch Action drop-down list.
9. Click Save.
10. Click Add.
11. Select the Haag-Streit manufacturer and the Review Octopus device.
12. Click Add.
13. (Optional) Enter a Device Nickname.
14. Click Save.
15. Close the Eyefinity Equipment Interface Setup window.