Setting Up the Konan Equipment

Before using the Konan equipment interface, follow these procedures to set up the Konan Specular Microscope equipment software for Eyefinity EHR:

Setting Up the Non-CellChek Software

If you do not use the CellChek software, follow these instructions:

  1. Open the Options window in the Konan software.
  2. Ensure that the following options are set:
    • Replace Analysis Results – ON
    • Print with Analysis Results – OFF
    • Auto ID Input – ON
    • Show Overlay – ON
    • Search by ID – OFF
    • Print size – Half size
    • Printing format – Pattern 1
    • ID input method – Electronic chart
    • The data failed to record – Not save
  3. Click Setting file for filing system.

    The Setting File for Filing System window opens.

  4. Ensure that the following options are set:
    • Timing of writing a File for Filing System – After analyzing
    • Auto delete function – OFF
    • Types of File for Filing System – Create only a JPEG file
    • Choice of the function – Create a File for Filing System
  5. In the Destination to save the file field, enter one of the following folders:
    • C:\OfficeMate\DATA\Konan
    • C:\OMATE32\DATA\Konan
  6. Click OK.

Setting Up the CellChek Software

If you use the CellChek software, follow these instructions:

  1. Double-click the Konan Analysis Software icon.
  2. Click CellChek.

    The CellChek window opens.

  3. Click Set Up, and select Electronic Medical Record.

    The Electronic Medical Record window opens.

  4. Set the Electronic Medical Record window options as shown in the preceding figure.

    5. The equipment data is stored in one of the following folders:

    • C:\OfficeMate\DATA\Konan

    • C:\OMATE32\DATA\Konan