Setting Up the Topcon IMAGEnet 6 Interface

  • Before you set up the equipment integration, Topcon must install the IMAGEnet 6 software (Imagenet6link.exe). The Topcon IMAGEnet 6 software must be installed on the Topcon equipment computer and on the computers where you will review images captured using the interface.
  • You must set up the Topcon IMAGEnet 6 interface from the computer on which the Topcon IMAGEnet 6 software is installed.
  1. Double-click the Eyefinity Equipment Interface Setup icon on your computer desktop.

    The Eyefinity Equipment Interface Setup window opens.

  2. Click Add.
  3. Select the Topcon manufacturer and the Capture ImageNet 6 (Imaging) device.
  4. Click Add.

    The settings and options appear.

  5. (Optional) Enter a Device Nickname.
  6. Click Browse, and select the location of the Topcon ImageNet6Link software.
  7. Select the Topcon equipment from which you want to capture images from the Topcon Device Name drop-down list.
  8. (Optional) Click Test to verify that you can connect to the Topcon ImageNet6 IIS server.
  9. Click Save.

  10. Click Add.

  11. Select the Topcon manufacturer and the Review ImageNet 6 (Imaging) device.
  12. Click Add.

    The settings and options appear.

  13. (Optional) Enter a Device Nickname.
  14. Click Browse, and select the location of the Topcon ImageNet6Link software.
  15. (Optional) Click Test to verify that you can connect to the Topcon ImageNet6 IIS server.
  16. Click Save.
  17. Close the Eyefinity Equipment Interface Setup window.