Setting Up the Humphrey Matrix Equipment

Before using the Humphrey Matrix equipment interface, you must set up the Humphrey Matrix equipment.

For detailed information on setting up the Humphrey Matrix equipment, see the following:

• Humphrey Matrix Visual Field Instrument User’s Guide
• Humphrey Matrix Connectivity Cable Instructions

If you use the Humphrey Matrix 800 with a mapped network drive, set up the equipment to export files to a shared folder that you create on your network. For help setting up the Humphrey Matrix 800, contact Carl Zeiss Meditec, Inc.

To interact with ExamWRITER, you must be using the Humphrey Matrix 7.02 or later. If you are unsure of your Humphrey Matrix version number, press the F6 key or click the F6 tab on the Matrix window to open the Matrix Help window. The SBC Software Version in the System Information frame must be 07.02.01[0] or later, and the MCU Software Version must be 02.03.01[0] or later. If the software versions do not meet these requirements specified, contact your Humphrey Matrix vendor for support.