Setting Up the Topcon CL Equipment

If you have questions about the RS-232C communication format or about setting up any of your Topcon equipment, contact your Topcon dealer or Topcon Medical Systems by using the address information on the back cover of your Topcon equipment documentation. You can also contact Topcon support at 866.922.6278.

Before using the Topcon CL equipment interface, set up the Topcon CL equipment:

  1. Press the MODE button.
  2. Select MENU.
  3. Choose RS-232C.
  4. Chose STD1.
  5. Press the Print switch to output the data.

    RS232C DATA OUT is displayed on the Topcon CL equipment monitor. When the transmission is complete, RS232C SUCCESS is displayed on the monitor.

  1. In the INITIAL MENU screen, press the Measurement switch, and move the cursor to ON-LINE.
  2. Choose ON-LINE.

    In the ON-LINE screen, you can modify the computer lensometer data receiving format, communication format, and communication speed.

  3. Press the Measurement switch, and move the cursor to DATA FORMAT.
  4. Press the Print switch, and choose STD1 (Topcon STD1 format).
  5. Press the Measurement switch.