Using the RK-600 & RK-700 Devices

1. Open ExamWRITER.
2. Create a blank exam, or open a saved exam for an existing patient.
3. Use the Reichert equipment to perform the examination or tests.

   After three readings for both refraction and kerotometry, the Reichert equipment displays the Review Data screen. Do not press the Print icon before completing steps 4 and 5 below.

4. After the tests using the Reichert equipment are completed, click the Interfaces icon in the ExamWRITER chart window.
5. Select Reichert:Auto-Refractor.

   The Eyefinity Equipment Interface window opens and displays this message: Waiting on Exam Data from DeviceName.

6. On the Review Data screen in the Reichert equipment, press Print.

   The Reichert device prints the captured data and transmits it to ExamWRITER, where it is imported into the patient exam. The Eyefinity Equipment Interface window closes.  

7. To view the data, go to the Vision/Rx > Spectacle tab in the patient’s exam record.