Setting Up the Zebra TLP 2824 Plus Barcode Label Printer

To set up the Zebra TLP 2824 Plus barcode label printer

  1. Download and install the printer drivers from the Zebra website.
  2. After downloading and installing the printer drivers, open the Control Panel.
  3. Open Printers and Faxes.
  4. Right-click ZDesigner TLP 2824 Plus (EPL) and select Printing Preferences.

    The ZDesigner TLP 2824 Plus (EPL) Printing Preferences window opens.

  5. Ensure that the Options tab is open and select the following settings:
    • No. Of Copies: 1
    • Speed: 1.50
    • Darkness: 3
    • Stocks: User defined
    • Paper Format: Inch, portrait, rotate 180°
    • Width: 2.10
    • Height: 1.48
    • All Unprintable Areas: 0.00
  6. Click the Advanced Setup tab and select the following settings:
    • Direct thermal (both Direct thermal and Thermal transfer may be grayed out)
    • Media Type: Label with gaps
    • Device Options: None and Top of form backup
    • Gap/Mark Height: 0.01
    • Offset: 0.00
    • Cut position: 0.00
    • Top offset: 0.00
    • Cutter: Never
  7. Click OK to save your settings.

Related Topics