Topcon CL, KR, & RM Interfaces

Eyefinity EHR receives data from the following Topcon equipment:

  • Computerized lensmeter (CL device)

  • Autorefractor/keratometer (KR device)

  • Autorefractor (RM device)

It then displays the data in its chart window a visit note.

Eyefinity EHRdoes not send data to the Topcon equipment.

The Topcon interface saves data files to a folder. You can review the data on all computers that have Eyefinity EHR installed and the review interface enabled.

Network Connection Method

Except for the KR-800PA and KR-800S, the Topcon interface uses a serial RS-232 cable or a null modem to connect to the computer or Terminal Server. The equipment interface can use multiple serial ports per PC. The Topcon KR-800PA and KR-800S interfaces use a LAN connection to the computer or Terminal Server.

If you use a digital refraction system with the KR-8000PA or KR-7000P autorefractor/keratometer, it cannot be connected to the computer that is running the Eyefinity Equipment Interface. Instead, the KR-8000PA and KR-7000P autorefractor/keratometer must be connected to a separate computer so that the topographic data correctly transfers to the digital refractor.

This section includes the following topics: